|
SR2000 series motorized valve is constituted with SRA2000 actuator and SRV2000 series valve body. The actuator can be installed after the valve body is installed on the pipe.
|
Material |
Valve body: Forged brass |
|
|
Seal: Nitrile butadiene rubber (NBR) |
|
|
Actuator cover: Fireproof ABS plastic |
|
|
Actuator chassis: Casting aluminum alloyed |
|
Working media |
Chilled/hot water |
|
Media temperature |
2~94℃ (36~201℉) |
|
Body pressure |
1.6Mpa (232psi) |
|
Protection class |
IP20 |
|
Pipe connection: |
BSP(G), NPT(N) |
|
Power supply |
24VAC, 110VAC, 120VAC, 220VAC, 230VAC, 50/60Hz |
|
Power consumption |
6W by hysteresis synchronous motor |
|
Working ambient temperature |
＜40℃ (104℉) |
|
Working ambient humidity |
10~90% RH no condensation |
|
Storage temperature |
-20~65℃ (-68~149℉) |
|
Auxiliary micro-switch (S) |
250VAC, 3A for optional |
SRA2000 ACTUATOR TECHNICAL DATA
|
Model |
Power supply |
Full stroke time (fit with SRV2000 valve body) |
|
SRA2100-220 |
220VAC, 50/60Hz |
Full open by motor: 10 seconds
Full close by spring: 5 seconds |
|
SRA2100-110 |
110VAC, 50/60Hz |
|
SRA2100-24 |
24VAC, 50/60Hz |
|
SRA2100-220R3 |
220VAC, 50/60Hz |
Full open by motor: 19 seconds
Full close by spring: 7 seconds |
|
SRA2100-110R3 |
110VAC, 50/60Hz |
|
SRA2100-24R3 |
24VAC, 50/60Hz |
Note: SRA2000 actuator can be make a set with SRV2000 and SRV2010 valve body.
SRV2000 VALVE BODY TECHNICAL DATA
|
Model |
Type |
Size |
Kvs/Cvs |
Closing-off pressure (Mpa/psi) |
|
SRV2200-15 |
2-way |
G1/2″/ 15mm |
0.6/0.7 |
1.0/1.2 |
1.5/1.8 |
0.25/36 |
|
SRV2300-15 |
3-way mixing |
G1/2″/ 15mm |
1.5/1.8 |
0.25/36 |
|
SRV2200-20 |
2-way |
G3/4″/ 20mm |
1.6/1.9 |
2.5/2.9 |
3.5/4.1 |
0.10/15 |
|
SRV2300-20 |
3-way mixing |
G3/4″/ 20mm |
2.5/2.9 |
0.10/15 |
|
SRV2200-25 |
2-way |
G1″/ 25mm |
2.5/2.9 |
4.8/5.6 |
0.06/9 |
|
SRV2300-25 |
3-way mixing |
G1″/ 25mm |
4.8/5.6 |
0.06/9 |
Note: SRV2000 valve body can be make a set with SRA2000 and SRA2010 actuator.
|
Procurement contract loading
